How To Use Manual Wheel Balancer
How To Use Manual Wheel Balancer. Icon 5parameters view and/or edit data input (wheel parameters) select if manual parameter entry is desired or required. How to use powerpoint morph.
Ve one of the spokes to 12 o’clock (e.g.: (a) move pedal to on position. Precision reading of unbalance, no suppression of minor unbalance readings.
There Are Three Main Mounting Methods.
(a) place wheel on balancer, outside face up. After confirming the rim diameter, press the key to input the rim diameter into the display. A safe and dry place and must always be available for consultation.
Enter A & D Wheel Dimensions Using Offset Arm.
1.3 where and how to keep the manual this manual (and relative attachments) must be kept in. Wheel balancer installation and operation manual manual p/n 5900262 — manual revision a2 — june 2021 designed and engineered in southern california, usa. Technicians should be careful to avoid back injury and should seek assistance when lifting a heavy tire/wheel assembly onto a balancing shaft.
4.2.：Set “A” “B” “D” Values:
1 2 1 2 1 2. (b) steady the wheel with your fingertips to stop the oscillation.the bubble always floats toward Xuse this manual properly without damaging it.
Install Wheel, Input A B D Value 1 Press Comes＞.
K eep the manual near the lift, in an easily accessible place. Use the most appropriate mounting method. The following paragraphs define the levels of danger
⚠ Danger Read The Entire Contents Of This Manual Before Using This Product.
Set “a” value：move the gauge to measuring position as illustrated as fig.1, hold the gauge still in position for 3 with the help of tire changer, change the rim and rubber 180 degree reference ＞ ＞＞ 4 then put down safe guard and press comes＞. Always remove any weights already attached to the wheel.
Post a Comment for "How To Use Manual Wheel Balancer"